Cisco 2911 Gigabit Router 1GB Ram/1GB CF L3 Switch SM-ES3G-16-P PoE PSU

Cisco 2911 Gigabit Router 1GB Ram/1GB CF L3 Switch SM-ES3G-16-P PoE PSU
Cisco 2911 Gigabit Router 1GB Ram/1GB CF L3 Switch SM-ES3G-16-P PoE PSU
Cisco 2911 Gigabit Router 1GB Ram/1GB CF L3 Switch SM-ES3G-16-P PoE PSU
Cisco 2911 Gigabit Router 1GB Ram/1GB CF L3 Switch SM-ES3G-16-P PoE PSU
Cisco 2911 Gigabit Router 1GB Ram/1GB CF L3 Switch SM-ES3G-16-P PoE PSU
Cisco 2911 Gigabit Router 1GB Ram/1GB CF L3 Switch SM-ES3G-16-P PoE PSU
Cisco 2911 Gigabit Router 1GB Ram/1GB CF L3 Switch SM-ES3G-16-P PoE PSU
Cisco 2911 Gigabit Router 1GB Ram/1GB CF L3 Switch SM-ES3G-16-P PoE PSU
Cisco 2911 Gigabit Router 1GB Ram/1GB CF L3 Switch SM-ES3G-16-P PoE PSU

Cisco 2911 Gigabit Router 1GB Ram/1GB CF L3 Switch SM-ES3G-16-P PoE PSU
This listing is for one Cisco 2911 router. > 4 Different IOS images on CF card, please see output for details. Cisco Configuration Professional installed (Cisco CP).

SM-ES3G-16-P 16 Port PoE Gigabit Enhanced EtherSwitch Service Module. C3560E IPServices feature set, Latest IOS 15 installed on switch module, see output below. Please contact me with any questions. System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1).

Total memory size = 1024 MB - On-board = 512 MB, DIMM0 = 512 MB. CISCO2911/K9 platform with 1048576 Kbytes of main memory. Main memory is configured to 72/72(On-board/DIMM0) bit mode with ECC enabled. Program load complete, entry point: 0x80803000, size: 0x1b340. Program load complete, entry point: 0x81000000, size: 0x5ca6ed0. Smart init is sizing iomem. Rounded IOMEM up to: 44Mb.

Use, duplication, or disclosure by the Government is. Subject to restrictions as set forth in subparagraph.

(c) of the Commercial Computer Software - Restricted. Rights clause at FAR sec.

(c) (1) (ii) of the Rights in Technical Data and Computer. Software clause at DFARS sec. Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.4(1)T2, RELEASE SOFTWARE (fc2).

Compiled Wed 30-Jul-14 09:14 by prod_rel_team. This product contains cryptographic features and is subject to United. States and local country laws governing import, export, transfer and. Third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for. By using this product you. Agree to comply with applicable laws and regulations. And local laws, return this product immediately.

Cisco CISCO2911/K9 (revision 1.0) with 1003520K/45056K bytes of memory. DRAM configuration is 64 bits wide with parity enabled. 255K bytes of non-volatile configuration memory. 1001952K bytes of ATA System CompactFlash 0 (Read/Write).

Press RETURN to get started! Jan 2 00:00:03.475: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = ipbasek9 and License = ipbasek9. May 29 05:43:20.671: c3600_scp_set_dstaddr2_idb(184)add = 80 name is Embedded-Service-Engine0/0.

May 29 05:43:36.059: %HWIC_SERIAL-6-STARTUP: HWIC Serial initialized. May 29 05:43:42.287: c3600_scp_set_dstaddr2_idb(184)add = 1 name is GigabitEthernet1/0. May 29 05:43:43.227: %CTS-6-ENV_DATA_START_STATE: Environment Data Download in start state.

May 29 05:43:48.187: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down. May 29 05:43:48.187: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down.

May 29 05:43:48.187: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down. May 29 05:43:48.187: %LINK-3-UPDOWN: Interface Serial0/0/0, changed state to down. May 29 05:43:48.187: %LINK-3-UPDOWN: Interface Serial0/0/1, changed state to down.

May 29 05:43:48.187: %LINK-3-UPDOWN: Interface Serial0/0/2, changed state to down. May 29 05:43:48.187: %LINK-3-UPDOWN: Interface Serial0/0/3, changed state to down. May 29 05:43:48.187: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up. May 29 05:43:49.031: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down.

May 29 05:43:49.255: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down. May 29 05:43:49.255: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down. May 29 05:43:49.255: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down.

May 29 05:43:49.255: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to down. May 29 05:43:49.255: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to down.

May 29 05:43:49.255: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/2, changed state to down. May 29 05:43:49.255: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/3, changed state to down. May 29 05:43:49.255: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up. May 29 05:43:50.503: %SYS-5-CONFIG_I: Configured from memory by console. May 29 05:43:52.219: %ILPM_FAULT-5-ILPM_NOTICE: Notice: Inline power supply is being started.

May 29 05:43:52.219: %ILPM_FAULT-5-ILPM_WARNING: Warning: Ethernet Switch Network Modules with PoE Support need to be reloaded to function properly. May 29 05:43:52.447: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down. May 29 05:43:52.447: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down. May 29 05:43:52.447: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down. May 29 05:43:52.447: %LINK-5-CHANGED: Interface Serial0/0/0, changed state to administratively down. May 29 05:43:52.447: %LINK-5-CHANGED: Interface Serial0/0/1, changed state to administratively down. May 29 05:43:52.447: %LINK-5-CHANGED: Interface Serial0/0/2, changed state to administratively down. May 29 05:43:52.451: %LINK-5-CHANGED: Interface Serial0/0/3, changed state to administratively down.

May 29 05:43:52.451: %LINK-5-CHANGED: Interface GigabitEthernet1/0, changed state to administratively down. May 29 05:43:52.563: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up. May 29 05:43:53.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down. May 29 05:43:53.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to down.

May 29 05:43:53.651: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to up. May 29 05:43:54.811: %SYS-5-RESTART: System restarted.

May 29 05:43:54.811: %SNMP-5-COLDSTART: SNMP agent on host yourname is undergoing a cold start. May 29 05:43:55.431: %SSH-5-ENABLED: SSH 1.99 has been enabled. May 29 05:44:21.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up. May 29 05:45:54.187: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to down. May 29 05:45:54.191: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down. May 29 05:46:17.223: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to up. May 29 05:46:47.227: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up. May 29 05:47:12.751: %FILESYS-5-CF: System CompactFlash 0 removed. Cisco Configuration Professional (Cisco CP) is installed on this device. This feature requires the one-time use of the username "cisco" with the. These default credentials have a privilege level of 15. YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE PUBLICLY-KNOWN. Here are the Cisco IOS commands. With the username and password you want. IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE. TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF. For more information about Cisco CP please follow the instructions in the. QUICK START GUIDE for your router or go to cisco. And it provides the default username "cisco" for one-time use. Already used the username "cisco" to login to the router and your IOS image. Supports the "one-time" user option, then this username has already expired. You will not be able to login to the router with this username after you exit. It is strongly suggested that you create a new username with a privilege level. Of 15 using the following command. With the username and password you want to.

NAME: "CISCO2911/K9", DESCR: "CISCO2911/K9 chassis, Hw Serial#: FTX1847AHAX, Hw Revision: 1.0". PID: CISCO2911/K9 , VID: V07 , SN: FTX1847AHAX. NAME: "High Speed Wan Interface Card with 4 serial ports(HWIC-4T) on Slot 0 SubSlot 0", DESCR: "High Speed Wan Interface Card with 4 serial ports(HWIC-4T)".

PID: HWIC-4T , VID: V03 , SN: FOC18214R97. NAME: "SM-ES3G-16-P: EtherSwitch SM L3 + PoE + 16 10/100/1000 on Slot 1", DESCR: "SM-ES3G-16-P: EtherSwitch SM L3 + PoE + 16 10/100/1000".

PID: SM-ES3G-16-P , VID: V02 , SN: FOC183929PU. NAME: "C2911 AC-POE Power Supply", DESCR: "C2911 AC-POE Power Supply". PID: PWR-2911-POE , VID: V02 , SN: ART1834F392. License State: Active, In Use. Period left: 8 weeks 4 days.

License State: Active, Not in Use, EULA not accepted. Embedded-Service-Engine cisco embedded service engine module.

GigabitEthernet GigabitEthernet IEEE 802.3z. ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1).

Yourname uptime is 5 minutes. System image file is flash0:c2900-universalk9-mz. Last reload type: Normal Reload. Last reload reason: Reload Command. Technology Package License Information for Module:'c2900. Service Module is Cisco GigabitEthernet1/0. Service Module supports session via TTY line 67. Service Module is in Steady state. Service Module reset on error is disabled. Service Module heartbeat-reset is enabled. Getting status from the Service Module, please wait.

EtherSwitch Service Module with 16 PoE GE ports. System board ID = 0xE2. Base MAC addr = 8480.2d52.8a00. System uptime = 0 days, 0 hours, 15 minutes, 2 seconds.

Operating System = Cisco c3560e IOS Software. Version = 15.0(2)SE10a.

Image path = flash:/c3560e-universalk9-mz. Internal Power Supply Type: AC-POE. Internal Power Supply 12V Output Status: Normal. Internal Power Supply POE -48V Voltage Status: Normal.

External Redundant Power Supply is absent or powered off. Fan 1 OK, Low speed setting. Fan 2 OK, Low speed setting. Fan 3 OK, Low speed setting.

Fan 4 OK, Low speed setting. Intake Left(Bezel) temperature: 18 Celsius, Normal. Intake Left temperature: 18 Celsius, Normal. Exhaust Right(Bezel) temperature: 22 Celsius, Normal. Exhaust Right temperature: 23 Celsius, Normal. CPU temperature: 47 Celsius, Normal. Power Supply Unit temperature: 21 Celsius, Normal. REAL TIME CLOCK BATTERY STATUS. Battery OK (checked at power up). Motherboard Components Power consumption = 55.3 WPower consumption =.

NM/SM slot 1 24.7 W. Total System Power consumption is: 80.0 W. Environmental information last updated 00:00:24 ago.

INT-PS 0 200.000 0.000 PS GOOD RPS ABSENT. Interface Config Device Powered PowerAllocated. Gi1/0 auto Unknown Off 0.000 Watts. Ethernet Switch Network Modules with PoE support should be reloaded to function. Properly upon PoE Power Supply OIR insertion/removal.

Displaying capability information for all available features. L3VPN PE-CE Link Protection: Enabled. OSPF Connected prefix suppression: Enabled. OSPF support of RFC3101: Enabled. OSPFv3 external path preference: Enabled.

OSPFv3 Stub Router Advertisement: Enabled. OSPFv3 support of RFC3101: Enabled.

OSPFv3 Demand Circuit Ignore: Enabled. OSPFv2 HMAC cryptographic authentication: Enabled.

BGP Remove Private AS all: Enabled. BGP Route Target Constraint: Enabled. BGPv4 Prefix Independent Convergence: Enabled. Inter-VRF Route Replication and Redistribution: Enabled. BGP Selective Address Tracking (bgp nexthop route-map): Enabled. ISIS IPV6 admin tag and advertise passive-only: Enabled.

BGPv6 Prefix Independent Convergence: Enabled. BGP MIB Version 2 Support: Enabled. BGP VPN Multicast SAFI129: Enabled. BGP MVPN AutoDiscovery Signaling: Enabled.

Route Tag in Dotted Decimal Notation: Enabled. BGP VRF to global import: Enabled. BGP VPN Distinguisher extended-community for RT rewrite: Enabled. ISIS BFD IPV6 Support: Enabled.

BGP MVPN CROUTE DAMPENING: Enabled. MPLS per-CE label allocation: Enabled. 1 -rw- 97153800 Nov 17 2014 20:43:04 +00:00 c2900-universalk9-mz. 2 -rw- 3064 Nov 17 2014 20:52:36 +00:00 cpconfig-29xx. 3 drw- 0 Nov 17 2014 20:53:00 +00:00 ccpexp.

244 -rw- 2464 Nov 17 2014 20:54:54 +00:00 home. 247 -rw- 108967472 May 29 2017 01:52:32 +00:00 c2900-universalk9-mz. 248 -rw- 110621884 May 29 2017 01:48:54 +00:00 c2900-universalk9-mz. 249 -rw- 104392336 May 29 2017 01:53:06 +00:00 c2900-universalk9-mz. 1025556480 bytes total (599130112 bytes free). Using driver version 1 for media type 1. Base ethernet MAC Address: 84:80:2d:52:8a:00.

Xmodem file system is available. The password-recovery mechanism is enabled. Mifs[2]: 12 files, 1 directories. Mifs[2]: Total bytes : 1806336.

Mifs[2]: Bytes used : 753152. Mifs[2]: Bytes available : 1053184. Mifs[2]: mifs fsck took 0 seconds. Mifs[3]: 0 files, 1 directories. Mifs[3]: Total bytes : 3870720.

Mifs[3]: Bytes used : 1024. Mifs[3]: Bytes available : 3869696. Mifs[3]: mifs fsck took 0 seconds. Mifs[4]: 5 files, 1 directories. Mifs[4]: Total bytes : 258048. Mifs[4]: Bytes used : 9216. Mifs[4]: Bytes available : 248832. Mifs[4]: mifs fsck took 0 seconds. Mifs[5]: 5 files, 1 directories. Mifs[5]: Total bytes : 258048. Mifs[5]: Bytes used : 9216. Mifs[5]: Bytes available : 248832. Mifs[5]: mifs fsck took 0 seconds. Mifs[6]: 512 files, 11 directories. Mifs[6]: Total bytes : 57931776.

Mifs[6]: Bytes used : 39601152. Mifs[6]: Bytes available : 18330624. Mifs[6]: mifs fsck took 17 seconds.

Bin uncompressed and installed, entry point: 0x3000. Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 15.0(2)SE10a, RELEASE SOFTWARE (fc3). Compiled Thu 03-Nov-16 13:57 by prod_rel_team.

HULC:Collect Entropy thread starting on box.. Using driver version 3 for media type 1.

Mifs[4]: 12 files, 1 directories. Mifs[4]: Total bytes : 1806336.

Mifs[4]: Bytes used : 753152. Mifs[4]: Bytes available : 1053184.

Mifs[5]: 0 files, 1 directories. Mifs[5]: Total bytes : 3870720. Mifs[5]: Bytes used : 1024. Mifs[5]: Bytes available : 3869696. Mifs[6]: 5 files, 1 directories. Mifs[6]: Total bytes : 258048. Mifs[6]: Bytes used : 9216.

Mifs[6]: Bytes available : 248832. Mifs[6]: mifs fsck took 0 seconds.

Mifs[7]: 5 files, 1 directories. Mifs[7]: Total bytes : 258048. Mifs[7]: Bytes used : 9216. Mifs[7]: Bytes available : 248832.

Mifs[7]: mifs fsck took 0 seconds. Mifs[8]: 512 files, 11 directories.

Mifs[8]: Total bytes : 57931776. Mifs[8]: Bytes used : 39601152. Mifs[8]: Bytes available : 18330624.

Mifs[8]: mifs fsck took 0 seconds. Boot Loader upgrade not required (Stage 2).

FIPS: Flash Key Check : Begin. FIPS: Flash Key Check : End, Not Found, FIPS Mode Not Enabled.

POST: CPU MIC register Tests : Begin. POST: CPU MIC register Tests : End, Status Passed. POST: MA BIST : End, Status Passed. POST: TCAM BIST : End, Status Passed. POST: CPU MIC interface Loopback Tests : Begin.

POST: CPU MIC interface Loopback Tests : End, Status Passed. POST: PortASIC RingLoopback Tests : Begin. POST: PortASIC RingLoopback Tests : End, Status Passed. POST: Inline Power Controller Tests : Begin.

POST: Inline Power Controller Tests : End, Status Passed. POST: PortASIC Port Loopback Tests : Begin. May 29 07:36:10.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to up. May 29 07:36:12.963: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to down. POST: PortASIC Port Loopback Tests : End, Status Passed.

Cisco SM-ES3G-16-P (PowerPC405) processor with 131072K bytes of memory. 512K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address : 84:80:2D:52:8A:00. Hardware Board Revision Number : 0x00.

Switch Ports Model SW Version SW Image. 1 18 SM-ES3G-16-P 15.0(2)SE10a C3560E-UNIVERSALK9-M. May 29 07:36:44.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to up. Mar 1 00:00:19.788: Read env variable - LICENSE_BOOT_LEVEL =. Jan 2 00:00:03.128: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c3560e Next reboot level = ipservices and License = ipservices.

Jan 2 00:01:40.923: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down. Jan 2 00:01:42.928: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. Jan 2 00:02:04.939: %SYS-5-RESTART: System restarted. Software (C3560E-UNIVERSALK9-M), Version 15.0(2)SE10a, RELEASE SOFTWARE (fc3).

Jan 2 00:02:05.787: %LINK-3-UPDOWN: Interface GigabitEthernet0/17, changed state to up. Jan 2 00:02:05.795: %LINK-3-UPDOWN: Interface GigabitEthernet0/18, changed state to up. Jan 2 00:02:06.793: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/17, changed state to up. Jan 2 00:02:06.802: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/18, changed state to up. In order to access the device manager, an enable secret is required.

If you enter the initial configuration dialog, you will be prompted for the enable secret. If you choose not to enter the intial configuration dialog, or if you exit setup without setting the enable secret. Please set an enable secret using the following CLI in configuration mode. Would you like to enter the initial configuration dialog? PID: SM-ES3G-16-P , VID: , SN: FOC183929PU.

SW PID Serial# Status Sys Pwr PoE Pwr Watts. ----------------- ---------- --------------- ------- ------. SW Status RPS Name RPS Serial# RPS Port#. Available:0.0(w) Used:0.0(w) Remaining:0.0(w).

Interface Admin Oper Power Device Class Max. ----- ---------- ------- ------------------- ----. Gi0/1 auto off 0.0 n/a n/a 15.4.

Gi0/2 auto off 0.0 n/a n/a 15.4. Gi0/3 auto off 0.0 n/a n/a 15.4.

Gi0/4 auto off 0.0 n/a n/a 15.4. Gi0/5 auto off 0.0 n/a n/a 15.4. Gi0/6 auto off 0.0 n/a n/a 15.4. Gi0/7 auto off 0.0 n/a n/a 15.4. Gi0/8 auto off 0.0 n/a n/a 15.4. Gi0/9 auto off 0.0 n/a n/a 15.4. Gi0/10 auto off 0.0 n/a n/a 15.4. Gi0/11 auto off 0.0 n/a n/a 15.4. Gi0/12 auto off 0.0 n/a n/a 15.4. Gi0/13 auto off 0.0 n/a n/a 15.4.

Gi0/14 auto off 0.0 n/a n/a 15.4. Gi0/15 auto off 0.0 n/a n/a 15.4. Gi0/16 auto off 0.0 n/a n/a 15.4. Jan 2 00:02:34.090: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to upsh c.

May 29 07:37:15.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up. May 29 07:37:24.249: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up.

May 29 07:37:25.255: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up. Permanent Non-expiring node locked license. Extension Expiring node locked license. Evaluation Expiring non node locked license.

EvalRightToUse Right to use evaluation non node locked license. RightToUse Right to use non node locked license.

Show pak Display license pak via call-home. Install Install license via call-home.

Revoke Revoke license via call-home. Resend Fetch license via call-home. Feature name Enforcement Evaluation Clear Allowed Enabled RightToUse. Ipservices yes yes yes yes yes. Ipbase no no yes no no.

License Store: Primary License Storage. StoreIndex: 0 Feature: ipservices Version: 1.0. License Store: Built-In License Storage.

Evaluation total period: 8 weeks 4 days. Evaluation period left: 8 weeks 4 days.

Period used: 0 minute 0 second. StoreIndex: 1 Feature: ipservices Version: 1.0.

The item "Cisco 2911 Gigabit Router 1GB Ram/1GB CF L3 Switch SM-ES3G-16-P PoE PSU" is in sale since Friday, June 8, 2018. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Enterprise Routers". The seller is "w3e30us" and is located in Clifton Park, New York. This item can be shipped worldwide.


Cisco 2911 Gigabit Router 1GB Ram/1GB CF L3 Switch SM-ES3G-16-P PoE PSU